 |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Home | Catalog Index | Classified Ads | Contact Us | Site Map
Overfill Protection Equipment
OPW 61SO Series 4" Overfill Prevention Drop Tube
$603.49 61SO-4000 The OPW 61SO Overfill Prevention Valve is designed to prevent the overfill of underground storage tanks by providing a positive shut-off of product delivery. The shut-off valve is an integral part of the drop tube used for gravity filling. The OPW 61SO allows easy installation (without breaking concrete) and requires no special manholes. 
|
OPW 61SOC 4" Coaxial Overfill Prevention Drop Tube
$718.03 61SOC-4001 The OPW 61SOC is used for coaxial fill applications, tanks equipped with a single product/vapor return connection. The 61SOC replaces the standard coaxial fill drop tube in a 4" riser fill pipe.
|
OPW 53V 2" Ball Float Vent Valve 6 1/8" Long
$74.63 53VML-0060 The OPW 53V Ball Float Vent Valves protrude into underground storage tanks from OPW 233 Series Extractor Fittings at the Stage I vapor return riser pipe or tank vent line. During a product delivery, as the tank level rises, a counterweight stainless steel ball seats on the valve body and restricts flow of vapors back to the transport truck. As the vapors become compressed in the tank (ullage), product flow into the tank is severely restricted. The 53VML Series Ball Float meets the U.S. EPA 90% requirement for product flow restriction into underground storage tanks.
|
|
OPW 53V 2" Ball Float Vent Valves 12" Long $80.20 53VML-0120 Same as above, 12" long.
|
|
OPW 53V 2" Ball Float Vent Valves 16" Long $86.89 53VML-0160 Same as above, 16" long.
|
|
OPW 53V 2" Ball Float Vent Valves 18" Long $89.12 Same as above, 18" long.
|
OPW 233 4"x 2" Extractor Fitting
$101.38 233-4420 OPW 233 Series Extractor Fittings thread into 4" NPT openings on underground storage tanks. A 4" riser pipe threads into the top of the 233 for use in Stage I Vapor Recovery or to access a ball float. The 233 Extractor Fittings have threaded single-outlet connection for attaching tank vent line. Internal threads on the 233 are designed to install a ball float or test plug in the extractor.
|
|
OPW 233 4"x 3" Extractor Fitting $102.53 233-4430 Same as above with 3" connection port.
|
OPW 233 4"x 2"x 2" Extractor Cross Fitting$104.84 233-4422 Same as above with two 2" connection ports.
|
|
OPW 233 4"x 3"x 2" Extractor Cross Fitting $108.29 233-4432 Same as above with one 2" and one 3" connection port.
|
|
OPW 233 4"x 3"x 3" Extractor Cross Fitting $108.29 233-4433 Same as above with two 3" connection ports.
|
Thank You For Stopping By!
We appreciate your patronage.
Copyright © 2007 Benfordfueling.com, LLC