Standard Features are listed at the bottom of this page.

• Simple electronic computer
• Stand-alone or Interfaced to Control Device
• RS485 interface or dual pulse output
• Exclusive eCalTM (Electronic Calibration)
• Magnet activated totals display
• Programmable unit of measure for US gallons, liters, or imperial gallons
• Operates from 115/230Vac, 60/50Hz, or 380 Vac, 50Hz
• Self contained (suction) models feature standard 1-HP continuous duty motor(s)
• Back lit LCD displays
• Satellite Outlet Connection (except Quad)
• Self-contained (suction) models: single, 1-product twin, or 2-product twin
• Remote models: single, 1-product twin, or 2-product twin
• Quad “Active-4 hose” remote or suction

• Low Hose Cabinet Design or
• High Hose Cabinet Design
• Front or side mount nozzle boots
• Long-life cabinet construction using galvaneal components and powder coated panels
• Black end panels & top
• Black dial face covers
• Red lower doors (optional colors available)
• Hinged swing out lower door
• Hinged swing down upper door
• Heavy duty hose hook (optional internal spring rewind retractor available)

• Simple single board design electronics. Includes CPU, power, display, eCal, RS485 connection, electromechanical analog totalizer, push-button programming switches, wiring terminal strip
• LED Backlighting board for the LCD display
• Optical pulser
• Designed for temperature extremes—no heaters or cooling fans required
• Long life, highly visible back lit LCD display, 1” (2.54cm) numerals
• Battery Backup for last sale recall during power outage (required for resale of fuel)
• Simple 2-command protocol via RS485 interface to fleet management systems supplies pump status, pulses, volume sale & volumetotals
• Field wiring goes directly to terminal strip on Computer (for new installations pull 72” of wire above grade level)
• Transaction display of: 999.999 for gallons, 9999.99 for liters
• Electronic hose totals of: 99999999.999 for gallons (8.3) 999999999.99 for liters (9.2)
• Built-in diagnostics with error codes

• Precision Bennett SB100 Meter, 4-piston, positive displacement design
• Type 75 or type 75-HD Bennett sliding vane pumping unit with integral vortex air eliminator
• SB100 meter is electronically calibrated (eCal). Mechanically calibrated meter is optional.
• All remote units include built-in inlet check valves to keep the hydraulics full and prevent meter/pulser count-up when the submersible pump pressurizes the system
• Remote units use replaceable paper filter
• Suction pumps use a reusable strainer
• All units feature 1” hose outlets with a 1”x3/4” reducer bushing
• 1-1/2” ground joint union inlet