|
|
Home |
Catalog Index | Classified Ads | Contact Us | Site Map
Fill Rite Battery Powered Pumps
|
With the Fill-Rite DC Fuel Transfer Pumps, you can take reliability and pumping power wherever you need it. From portable use to tank and barrel mounting, DC pumps from Fill-Rite make transferring fluids safe and trouble-free where AC power is not available.
|
Fill Rite SD1202 12 Volt DC Pump,13 GPM (Manual Nozzle)
$353.18
560066
You get the ruggedness of cast iron and the portability of DC power. This pump delivers up to 13 GPM/49 LPM. The SD1202 is designed for tank or barrel mounting.
- Thermally protected, UL/cUL listed, explosion-proof,
- 1/4 HP motor
- 2" NPT, no tank adapter needed
- 3/4" x 10´ hose, manual nozzle and 15´ power cable
- 1" polymer adjustable suction pipe
- Positive displacement, rotary vane configuration
- Ball bearing construction, no lubrication required
- 30 minute duty cycle
- Pump may be padlocked
Box Contents
- SD1202 Pump
- Suction pipe fits 15 to 55 gallon drum
- 15' (4.6m) -3 wire power cable
- 3/4"x 10' Hose with static wire
- 3/4" Manual Nozzle
Compatible fluids (Not to be used with fluids that have a flash point of lOO°F or less.)
Diesel Fuel, Gasoline, Kerosene, Mineral Spirits
|
Fill Rite 1210C 12 Volt DC Pump,15 GPM (Manual Nozzle)
$417.95
560012
This industry standard DC pump dispenses up to 15 GPM (57 LPM). The pump weighs less than 27 pounds (12.2kg), with hose and nozzle, and has a draw that’s easy on the DC power source.
- Explosion-proof UL/cUL listed 1/4 HP motor with permanent magnet and ball bearings
- Heavy-duty switch, thermal overload protection and junction box
- Heavy-duty three-wire battery cable
- Iron rotor
- Automatic bypass valve
- Built-in strainer
- 12' (3.7m) hose with static ground wire
- Manual nozzle with nozzle boot that protects against dirt and contamination
- 2" threaded base for tank openings
- Corrosion-Proof adjustable section pipe
- Machined carbon vanes
- Pump may be padlocked
- No foot valve required
- UL/cUL and bears CE Marking
Box Contents
- 1210C Pump
- Suction pipe fits 15 to 55 gallon drum
- 18'(4.6m)-3 wire power cable
- 3/4"x 12' Hose with static wire
- 3/4" Manual Nozzle
Compatible fluids (Not to be used with fluids that have a flash point of lOO°F or less.)
Diesel Fuel, Gasoline, Kerosene, Mineral Spirits, Stoddard Solvent & Heptane
|
Fill Rite 1211C 12 Volt DC Pump With FR807C Meter, 15 GPM (Manual Nozzle)
$622.20
560060
Fill Rite 12 Volt DC Pump W/ Meter,15 GPM
Box Contents
- 1210 Pump
- FR807C Meter
- Suction pipe fits 15 to 55 gallon drum
- 18'(4.6m)-3 wire power cable
- 1"x 12' Hose with static wire
- 1" Manual Nozzle
Compatible fluids (Not to be used with fluids that have a flash point of lOO°F or less.)
Diesel Fuel, Gasoline, Kerosene, Mineral Spirits, Stoddard Solvent & Heptane
|
Fill Rite FR4210D 12 Volt DC High Flow Pump
$505.41
560062
In a world where time is money, the FR4210 saves you both. Thanks to its high flow rate of 20 GPM (76 LPM) and low 22 Amp draw, you’ll spend less time at the pump and more time accomplishing the task at hand.
- 1/4 HP, 12 Volt DC motor
- Built-in check valve, bypass valve and thermal expansion valve
- 1" diameter, 12´ hose and 1" manual nozzle
- Pump may be padlocked
- Corrosion-Proof adjustable section pipe
- Explosion-proof permanent magnet motor
- Thermal overload protection
- 30-minute duty cycle/not for continuous operation
- Ball bearing construction, no lubrication required
- Machined carbon vanes
- 2" threaded base for tank openings
- UL/cUL listed and bears CE Marking
Box Contents
- 4210 Pump
- Suction pipe fits 15 to 55 gallon drum
- 18'(4.6m)-3 wire power cable
- 1"x 12' Hose with static wire
- 1" Manual Nozzle
Compatible fluids (Not to be used with fluids that have a flash point of lOO°F or less.)
Diesel Fuel, Gasoline, Kerosene, Mineral Spirits, Stoddard Solvent & Heptane
|
Fill Rite FR410 12 Volt DC Diaphragm Pump, 13GPM (Manual Nozzle)
$915.96
560045
A unique, new pump that can consistently transfer heavy fluids- such as lube and gear oils-at up to 13 GPM (49 LPM).
- Explosion-proof UL/cUL listed 1/4 HP motor with permanent magnet and ball bearings
- Heavy-duty switch, thermal overload protection and junction box
- Heavy-duty three-wire battery cable
- Reciprocating, spring-driven, dual diaphragm design optimizes flow rate (Patent #5,219,274)
- Transfers fluid viscosities to 1000+ CPS (SAE 80-90W oil at 31°F)
- Can also transfer particulate fluids
- Self-priming
- Choice of outlet ports for installation flexibility
- Can be set up to safely transfer other industrial fluids and chemicals
- Pump may be padlocked
Box Contents
- FR410 Pump
- Suction pipe fits 15 to 55 gallon drum
- 18'(4.6m)-3 wire power cable
- 1"x 12' Hose with static wire
- 1" Manual Nozzle
Compatible fluids (Not to be used with fluids that have a flash point of lOO°F or less.)
Ethylene Glycol, Diesel Fuel, Grease, Kerosene, Hydraulic Oil, Motor Oil, and Water
|
Email info@benfordfueling.com
(205)330-7979
Thank You For Stopping By!
We appreciate your patronage.
Copyright © 2011 Benfordfueling.com, LLCAbsorbents | Cimtek | Cimtek Filters | Fill Rite | Fill Rite Meter | Fuel Dispenser | Gas Meters | Gas Pump | Gasoline Pump
Hand Pumps For Fuel | Hose Reels | Lubrication Equipment | Pos Equipment | Spill Booms | Spill Kits
|
