LiquiDynamics Oil Pumps (Hand Operated)

This compact, high flow, dual-action design delivers up to 20 GPM (76 LPM) per 100 strokes. Lightweight and portable, with a variety of options, these pumps meet a full range of applications. Ideal for gasoline, oil or a wide variety of approved liquids.

• Lightweight cast aluminum body
• Stainless steel inner liner
• "Easy mount" 2" tank adapter
• Corrosion-Proof adjustable suction pipe
• Pump flow can be reversed by rotating piston 180°
• Steel yoke handle
• All models UL listed
• Anti-siphoning device
• Pump may be padlocked

MODEL MA-2, P/N 10002
Rugged polypropylene construction with polypropylene coated steel shaft and nitrile seals. Fits 5 to 55 gallon containers and comes with adapter to fit 2” buttress as well as 2” pipe threads. For use with light oils, hyd. fluid, ATF, mixed antifreeze and mild corrosive fluids. Approx. 14 strokes/gal.

MODEL MA-2N, P/N 10002N
Strong nylon body utilizes a stainless steel pump shaft and Teflon shaft seal for compatibility with a broad range of fluids. Pump is sized to fit 55 gallon drums, complete with 2” bung adapter and discharge spout.

Cast iron rotary hand pump, two vane construction, for use with lubricating oils. Comes complete with 2” bung adapter and three piece steel suction pipe. Not recommended for use with gasoline. Approx. 20 revolutions per gallon. Pump is supplied with bung adapter, suction pipe, inlet strainer and 1” x 6’ oil discharge hose with nozzle.

Heavy duty syphon pump constructed of polyethylene. For use with light oils, water, antifreeze and many chemicals. Flow rate of approx. 5 gal./min. nominal. ng adapter and discharge spout.

MODEL MA-7, P/N 10007
Lever hand pump for use with heavy gear oils. Fits 16 gallon and 30 gallon drums. Comes complete with 2” bung adapter and 6’ nylon reinforced discharge hose with curved discharge spout. Approx. 12 strokes/qt.

MODEL MA-7C, P/N 10007C
Same as P/N 10007 above, but includes cover for 16 gallon drum.

MODEL MA-7S1, P/N 10007-S1
Same as P/N 10007 above, but includes Cover, Band Dolly & Pint Meter

MODEL MA-7S2, P/N 10007-S2
Same as P/N 10007 above, but includes Cover, Band Dolly

MODEL MA-7S3, P/N 10007-S3
Same as P/N 10007 above, but includes Pint Meter

MODEL MA-9, P/N 10009
“T” Handle pump with curved “turn up” non drip spout. Includes 2” bung adapter suitable for 16 to 55 gallon drums. Typical uses include diesel fuel, light oils, ATF, antifreeze and other similar petroleum products. Approx. 1 stroke/qt.

MODEL MA-9T, P/N 10009T
Same as above but with heavy duty construction for heavy duty applications.

MODEL MA-10, P/N 10010
Lever pail pump fits 5 to 6½ gallon pails. Dispenses gear lube via a 6’ nylon reinforced vinyl hose with curved discharge spout. Positive lock nut holds pump securely in position. Approx. 16 strokes/pint.

MODEL MA-10M, P/N 10010M
Same as P/N 10010 except a lower gear case fitting replaces the discharge spout. For use with outboard marine engines.

MODEL MA-10P, P/N 10010P
Same as MA-10, but includes P/N 100200 Electronic pint meter.

High Flow rotary hand pump discharges approximately 1 quart per revolution and can empty a 55 gallon drum in a matter of minutes. Pump body is constructed of lightweight aluminum with gear driven impellers and Nitrile seals which makes this pump ideal for transferring larger quantities of lightweight oils, hydraulic fluids, transmission fluid, antifreeze and diesel fuel.

Pump is supplied with bung adapter, suction pipe, inlet strainer and 1” x 6’ oil discharge hose with nozzle.

Heavy duty hand operated lever drum pump, with high volume output and hose thread fitting at discharge. Fits 16, 30 and 55 gallon drums. For use with light oils, ATF, 100% antifreeze, hydraulic fluids and diesel fuel. Includes telescoping suction pipe. Approx. 12 strokes/gal.

MODEL MA-70, P/N 30200
Heavy duty gear oil hand pump designed to fit 5, 16, 30 and 55 gallon containers. Comes complete with 2” bung adapter, telescoping suction pipe, 6’ nylon reinforced discharge hose, ball shutoff valve and curved discharge spout. Approx. 8 oz. per stroke, and four strokes per quart.

P/N 30200C
Same as P/N 30200 above, but includes cover for 16 gallon drum.

P/N 30200-S1
Same as P/N 30200 above, but includes Cover, Band Dolly

P/N 30200-S2
Same as P/N 30200 above, but includes Cover, Band Dolly & Electronic Meter

P/N 30200-S3
Same as P/N 30200 above, but includes Pint Meter

Oil suction gun holds approximately 16 oz. of fluid. Comes with 10” flexible suction tube and bright zinc plated finish. Ideal for emptying small reservoirs.

Model MA-3, P/N 560006
Polypropylene plunger pump screws directly onto the Reike spout on 5 gallon containers. Complete with 5’ nylon reinforced hose, ball valve nozzle and spout. For use with light oils, ATF, hyd. fluid and 100% antifreeze. Approx. 4 strokes/qt.

Model MA-3J, P/N 560006J
Same features and construction as the MA-3 above, except made to fit 2½ gallon jug with 63mm cap. For use with light oils, ATF, hyd. fluid and 100% antifreeze. Approx. 1 fluid oz. per stroke.

All brass plunger pump ideal for use with solvents and chemicals compatible with brass construction and PTFE seals. Complete with 2” NPT threads to fit 55 gallon drums. Approx. 1/2 pint/stroke. Ideal for use with brake cleaner fluids.

Polypropylene construction with nitrile seals and stainless steel piston shaft which allows use with water, water based chemicals, mild acids and mild alkali solutions as well as oils. Approx. 16 strokes/gal.

Polypropylene piston pump uses viton seals for use with various industrial chemicals such as mild acids, methyl ethyl ketone, DEF fluid and similar fluids. Complete with telescoping suction pipe to fit drums up to 55 gallon. Approx. 12 strokes/gal.