|
|
Home |
Catalog Index | Classified Ads | Contact Us
LiquiDynamics Oil Control Valves and Meters
|
LiquiDynamics 530100 BM-03 Non-Preset Mechanical Pint Meter
$504.20 $453.78 
530100
BM-03
Pint calibration with 8 pint dial capacity and 1/4
pint graduation, totalizes in pints. Ten inch tall
discharge spout is equipped with a 1/4 manual
tip designed to allow easy filling of
differentials. Inlet is 1/2” NPTF swivel.
For use with gear oils.
|
|
|
LiquiDynamics 530101 BM-08 Non-Preset Mechnical Quart Meter
$398.00 $358.20
530101
BM-08
Quart calibration with 16 quart dial capacity and 1/4 quart
graduations, totalizes in quarts. Rigid discharge spout
has an automatic non drip tip. Meter comes standard with 1/2” NPTF inlet swivel. For use with motor oils, gear oils, ATF and antifreeze (ethylene glycol).
BM-08L
Same as BM-08 above except with liter calibration, meter has
10 liter dial capacity, liter totalizer. Note: This meter is not recommended for use with antifreeze.
|
|
|
LiquiDynamics 530102 BM-15 Non-Preset Mechanical Quart Meter (Flex Spout)
$418.40 $376.56
530102
BP-15
Quart calibration with 16 quart dial capacity and 1/4 quart
graduation, totalizes in quarts. Meter comes with a flex
discharge spout and manual shutoff tip. For use with motor oils, gear oils, ATF and antifreeze (ethylene glycol).
BM-15L
Same as BM-15 except with liter calibration, meter has 10 liter dial capacity, liter totalizer. Note: This meter is not recommended for use with antifreeze.
|
|
|
LiquiDynamics 530107 BM-19 Preset Mechanical Quart Meter
$626.60 $563.94
530107
BM-19
Quart calibration with preset capability, 16 quart dial
capacity, 1 quart graduations and quart totalizer.
Comes complete with rigid spout, non drip tip and
1/2” NPTF inlet swivel. For use with motor oils,
gear oils, ATF and antifreeze (ethylene glycol).
|
|
|
LiquiDynamics 530109 BM-20 Preset Mechnical 60 Quart Meter
$627.80 $565.02
530109
BM-20
Quart calibration with preset
capability, 60 quart dial capacity,
1 quart graduations and gallon
totalizer. Comes complete with rigid
spout, non drip tip and 1/2” NPTF inlet
swivel. For use with motor oils, gear oils, ATF and
antifreeze (ethylene glycol).
BM-20L
Same as BM-20 above except with liter calibration, meter has
16 liter dial capacity and liter totalizer.
|
|
|
LiquiDynamics 530113 BM-20G Preset Mechnical Gallon Meter
$663.40 $597.06
530113
BM-20G
Gallon calibration with preset capability,
60 gallon dial capacity, 1 gallon
graduations and gallon totalizer. Meter
includes rigid spout, non drip tip and 1/2” NPTF inlet swivel.
For use with motor oils, ATF and antifreeze (ethylene glycol).
|
|
|
LiquiDynamics 100351 K-500 Digital Preset Multi-measure Meter
$683.80 $615.42
100351-XXX
Model K500 Series
The K-500 Electronic Preset Meter may be used to dispense a preset quantity of oil, transmission fluid, hydraulic fluid,
antifreeze and other compatible fluids. It is powered by four, field replaceable 1.5V AA batteries. Units of
measurement are easily switched between pints, quarts, gallons and liters. The meter flow range is 1/4 to 8
GPM with a maximum operating pressure of 1,000 PSI with an accuracy of +/- 1/2%. Preset capability is from 0.1 to 99.9 units and may be programmed with up to 5 different frequently used preset quantities in addition to quick recall of the last used preset quantity. May also be used to show flow rate in gallons per minute. This preset meter is available with a wide selection of discharge spouts to fit most any application. Discharge spout may be positioned at five different angles and tip rotates 90°.
Click on the photo to view the different spout configurations available
|
|
|
LiquiDynamics 530125S BP-100 Series Standard Electronic Preset Meter
$610.40 $549.39
530125S
Model BP-100 Series
Two versions of this pre-settable meter are available. The “Advanced” version features up to six programmable preset batch totals, ability to view the previous five batches
dispensed, change units of measure and has flow rate capability.
The “Standard” version is greatly simplified, you enter the quantity you wish to dispense and pull the trigger.
Both meters are powered by four AAA alkaline batteries, which can be easily replaced in the field without loss of calibration or data. The 1/2” NPTF inlet includes a filter screen
and swivel. These meters are suitable for use with engine oil, gear oil, transmission fluid, hydraulic fluid and antifreeze..
Click on the photo to view the different spout configurations available
|
|
|
LiquiDynamics 530124 LB-300 Series Electronic Non-Preset Meter
$383.80 $345.42
530124XXX
Model LB300 Series
These meters may be programmed to display pints, quarts, gallons or liters.
Power is supplied by a lithium battery with a life expectancy of 3 to 5 years.
Flow range is 0.25 to 8.0 GPM and 1,500 PSI operating pressure.
|
|
|
LiquiDynamics 100113 VN-200 Fluid Control Valve
$108.60 $97.74
100113xxx
Model VN-200 Series
These fluid control valves are an economical and reliable method of controlling and
dispensing common shop fluids such as engine oil, gear oil, transmission fluid,
antifreeze and hydraulic fluid.
The “balanced” valve design with trigger guard allows positive fluid control for easy
“topping off” without splashing. The valve is also available in a “trigger lock” version.
|
|
|
LiquiDynamics 32107 High Volume Oil Control Valve
$260.00 $234.00
32107
High volume, high pressure oil control
valve with 1” NPTF swivel. Max
operating pressure of 1,000 PSI.
|
|
Email info@benfordfueling.com
(205)330-7979
Thank You For Stopping By!
We appreciate your patronage.
Copyright © 2007 Benfordfueling.com, LLC
|
