 |
| |
| |
| |
Home | Catalog Index | Classified Ads | Contact Us | Site Map
|
|
Cim-Tek 200E 3/4" Spin On Fuel Filter $50.27 700xx CASE OF 6 200E Spin-on Filters, recommended for low-volume power pumps and gravity-flow applications.
Ethanol blends or methanol blends of 10% or less are
compatible with the 200E Spin-on Filters; however, phase separation will not be detected if it occurs.
The 200E Spin-on Filters are not to be used with aviation fuels, E85 ethanol, E100 ethanol, M85
methanol, M100 methanol fuels. 
 |
|
Cim-Tek 200AE 1" Spin On Fuel Filter $55.17 700xx CASE OF 6 200AE Spin-on Filters, recommended for low-volume power pumps and gravity-flow applications. The maximum flow is 18 gpm/67 Ipm. The maximum working pressure is 50 psi/3.4 bar.
Ethanol blends or methanol blends of 10% or less are
compatible with the 200AE Spin-on filters; however, phase separation will not be detected if it
occurs. The 200AE Spin-on Filters are not to be used with aviation fuels, E85 ethanol, E100 ethanol,
M85 methanol, or M100 methanol fuels.
|
Cim-Tek 300 Series 3/4" Spin On Fuel Filter $67.05 700xx CASE OF 12 300 Series Particulate Spin-on Filters are designed for the service station pump and dispenser.
Gasoline, diesel fuel, and fuel oils are efficiently filtered with a particulate resin-impregnated cellulose medium.
|
Cim-Tek 300HS Series Hydrosorb® II 3/4" Spin On Filter $105.12 700xx CASE OF 12 300 series HYDROSORB® II Spin-on Filters, designed for service station pumps and dispensers.
HYDROSORB® II spin-on filters are designed to remove free water, emulsified water, and particulates from diesel fuels, gasoline, and fuel oils.
HYDROSORB® II Spin-on Filters are compatible with gasoline-alcohol blends of 10% or less, but will not remove water. Phase separation will not be detected if it occurs.
HYDROSORB® II Spin-on Filters are not to be used with aviation fuels, methanol, or methanol-blended fuels.
|
Cim-Tek 400 Series Gilbarco Spin On Filter $104.94 700xx CASE OF 12 400 Series Particulate Spin-on Filters, designed for the service station pump and dispenser.
Gasoline, diesel fuel, and fuel oils are efficiently filtered with a particulate resin-impregnated cellulose medium.
Ethanol blends or methanol blends of 10% or less are compatible with the Particulate 400 Spin-on Filters; however, phase separation will not be detected if it occurs. The Particulate 400 Spin-on Filters are not to be used with aviation fuels, E85 ethanol, E100 ethanol, M85 methanol, or M100 methanol fuels.
|
Cim-Tek 400HS Series Hydrosorb® II Gilbarco Spin On Filter $143.64 700xx CASE OF 12 400 HYDROSORB® II Spin-on Filters are specially designed to pass allowable amounts of water entrained in certain diesel fuels and gasolines such as MTBE blends. 400 HYDROSORB® II Spin-on Filters are compatible with gasoline-alcohol blends of 10% or less, but will not remove water. Phase separation will not be detected if it occurs. 400 HYDROSORB® II Spin-on Filters are not to be used with aviation fuels, methanol, or methanol-blended fuels. Shrink Wrapped 12 to a Carton
|
Cim-Tek 50002 1"x 3/4" Filter Adaptor $12.84 50002 Cast Iron 1" Filter adaptor for use with 200/300 series filters. Has 1" inlet and outlet ports with 3/4" filter port. |
Cim-Tek 50003 3/4"x 3/4" Filter Adaptor $13.76 50003 Cast Iron Filter Adaptor used for 200/300 Series Filters. Inlet and outlet ports are 3/4" and 3/4" filter port |
Cim-Tek 50004 1" High Flow Filter Adaptor $15.13 50004 Cast Iron Filter Adaptor used for High Flow 200AE Filters. Has 1" inlet and outlet ports, with 1 3/8" filter port. |
Cim-Tek 500B Bennett Fuel Filter Cartridge $291.24 30001 CASE OF 24 500B Replacement Cartridge
Interchangeable with Bennett A3119
|
Cim-Tek Centurion I High Volume Filter Housing (30gpm/112lpm) $126.44 40001 APPLICATION The Centurion I has a single 1" npt filter housing with a replaceable element for filtration of gasoline, diesel fuel, and fuel oils. The Centurion I is designed for service stations, truck stops, and commercial high-speed dispensing applications. A nominal 10 micron element is recommended for gasoline and diesel fuels. A nominal 30 micron element may be preferred for heavier distillates such as diesel fuel and fuel oils. A nominal 2 micron element is available for greater filtration efficiency. Consult the factory for oil and methanol applications. The Centunon I is not to be used with aviation fuels. ELEMENTS SOLD SEPERATLY BELOW
|
Cim-Tek Centurion II High Volume Filter Housing (30gpm/112lpm) $283.88 40008 APPLICATION The Centurion II has a dual 1" npt filter housing with a replaceable elements for filtration of gasoline, diesel fuel, and fuel oils. The Centurion II is designed for service stations, truck stops, and commercial high-speed dispensing applications. A nominal 10 micron element is recommended for gasoline and diesel fuels. A nominal 30 micron element may be preferred for heavier distillates such as diesel fuel and fuel oils. A nominal 2 micron element is available for greater filtration efficiency. Consult the factory for oil and methanol applications. The Centunon II is not to be used with aviation fuels. ELEMENTS SOLD SEPERATLY BELOW
|
|
Cim-Tek Centurion III High Volume Filter Housing (60gpm/225lpm) $289.43 40013 APPLICATION The Centurion III has a Dual 1 1/2" npt filter housing with a replaceable elements for filtration of gasoline, diesel fuel, and fuel oils. The Centurion III is designed for service stations, truck stops, and commercial high-speed dispensing applications. A nominal 10 micron element is recommended for gasoline and diesel fuels. A nominal 30 micron element may be preferred for heavier distillates such as diesel fuel and fuel oils. A nominal 2 micron element is available for greater filtration efficiency. Consult the factory for oil and methanol applications. The Centunon III is not to be used with aviation fuels. ELEMENTS SOLD SEPERATLY BELOW
|
Cim-Tek Centurion IV High Volume Filter Housing (90gpm/337lpm) $430.30 40020 APPLICATION The Centurion IV has a tripple 2" npt filter housing with a replaceable elements for filtration of gasoline, diesel fuel, and fuel oils. The Centurion IV is designed for service stations, truck stops, and commercial high-speed dispensing applications. A nominal 10 micron element is recommended for gasoline and diesel fuels. A nominal 30 micron element may be preferred for heavier distillates such as diesel fuel and fuel oils. A nominal 2 micron element is available for greater filtration efficiency. Consult the factory for oil and methanol applications. The Centunon IV is not to be used with aviation fuels. ELEMENTS SOLD SEPERATLY BELOW
|
Cim-Tek Centurion E02 Filter Element $115.88 30065 E02 Replacement Element for Centurion I,II,III, IV High-Performance Microglass/Cellulose 2 Micron Nominal Filtration Includes Gaskets Shrink Wrapped 6 to a Carton
|
|
Cim-Tek Centurion E10 Filter Element $79.25 30002 E10 Replacement Element for Centurion I, II, III, IV Particulate Resin-Impregnated Cellulose 10 Micron Nominal Filtration Includes Gaskets Shrink Wrapped 6 to a Carton
|
|
Cim-Tek Centurion E30 Filter Element $75.56 30004 E30 Replacement Element for Centurion I, II, III, IV Particulate Resin-Impregnated Cellulose 30 Micron Nominal Filtration Includes Gaskets Shrink Wrapped 6 to a Carton
|
|
Cim-Tek Centurion EHS10 HYDROSORB ® II Filter Element $155.25 30033 EHS-10 Type 2 Replacement Element for Centurion I, II, III, IV HYDROSORB ® II (Water and Particulate Removal) 10 Micron Nominal Filtration Includes Gaskets Shrink Wrapped 6 to a Carton
|
|
Cim-Tek Centurion EHS30 HYDROSORB ® II Filter Element $152.01 30036 EHS-30 Type 2 Replacement Element for Centurion l, III, IV HYDROSORB ® II (Water and Particulate Removal) 30 Micron Nominal Filtration Includes Gaskets Shrink Wrapped 6 to a Carton
|
Cim-Tek 60001 2" Pre-Vent Fill Cap $30.84 60001 Vapor-control fill cap for above-ground gasoline and diesel fuel storage tanks.
|
Cim-Tek Hydroburn® Gasoline Fuel Treatment 32 oz Bottles $192.06 60062 Twelve 32 ounce bottles pers case. Each bottle treates 80 gallons of water. Hydroburn® fuel treatment is scientifically formulated to break the weak hydrogen bond between water molecules... and then becomes a combustible compound that liberates the water molecule as steam in the exaust. HYDROBURN® eleminates water and water related problems when applied correctly!! Period. HYDROBURN® prevents and REVERSES PHASE SEPERATION in E-10 fuel... See how it works! See the Video HYDROBURN® improves fuel quality and promotes more complete combustion.
|
Cim-Tek Hydroburn® Diesel Fuel Treatment 32 oz Bottles $192.06 60066 Twelve 32 ounce bottles pers case. Each bottle treates 250 gallons of diesel fuel. Hydroburn® fuel treatment is scientifically formulated to break the weak hydrogen bond between water molecules... and then becomes a combustible compound that liberates the water molecule as steam in the exaust. HYDROBURN® eleminates water and water related problems when applied correctly!! Period. HYDROBURN® improves fuel quality and promotes more complete combustion, increasing MPG HYDROBURN® replaces needed lubricity and cetane lost in the ULSD refining process
|
Thank You For Stopping By!
We appreciate your patronage.
Copyright © 2011 Benfordfueling.com, LLC
Hand Pumps For Fuel | Hose Reels | Lubrication Equipment | Pos Equipment | Spill Booms | Spill Kits